SimTek Sherwood Fence in Springville, UT, Salt Lake County & Across Utah
Get the warm look of a wood privacy fence, without the warping or yearly staining. The SimTek Sherwood fence delivers true privacy across Utah, from Park City to Spanish Fork.
The SimTek Sherwood fence is a molded wood-look privacy fencing system built from a polymer and rubber blend that's textured and colored to resemble weathered cedar planking. Each SimTek fence panel is cast from real wood, so the grain, knots, and board lines look authentic up close, but the panel itself never needs sanding, staining, or sealing. The construction shrugs off freeze-thaw winters and dry summer sun alike, keeping its shape and color season after season.
For homeowners across the Wasatch Front who want SimTek Sherwood fencing without the wood-fence upkeep, this line solves a real problem: Utah's dry summers and freezing winters are hard on natural cedar, causing cracking, silvering, and rot at the post line within a few seasons.
No staining, painting, or sealing, ever
UV-stable color that resists fading in Utah's high-altitude sun
Withstands freeze-thaw cycles without warping or splitting
Solid panel construction blocks sightlines and muffles street noise
Won't rot, splinter, or attract termites
Backed by a manufacturer warranty on materials
Sherwood Panel Colors and Configuration Options
Sherwood panels come in three finishes designed to match different home exteriors and landscaping styles. We stock samples of each at both showrooms so you can compare the texture and tone against your siding, roofline, or existing hardscape before you commit.
Dark Oak Gray Sherwood fence panels: a weathered, driftwood-gray finish that pairs well with modern and farmhouse exteriors
Red Cedar Sherwood fence panels: a warm reddish-brown tone that mimics freshly stained cedar
Walnut Brown Sherwood fence panels: a deep, rich brown that reads as a classic privacy fence from the curb
Standard 6-foot and 8-foot privacy heights available
Matching post caps, gates, and hardware for a finished look
Solid steel-reinforced posts for added strength in high-wind areas around Saratoga Springs and Eagle Mountain
If you like the SimTek molded fence system but want a different texture, we also install the SimTek Alleghany fence through SimTek Fencing with a rougher-hewn wood look and a stone-textured line for homeowners who prefer a masonry appearance over a wood grain.
Our Installation Process
How We Install Your SimTek Sherwood Fence
Every Sherwood fence installation follows the same careful process whether it's a small backyard or a full property line. Here's what to expect from the first site visit to the final walkthrough.
1
Site Evaluation and Measurement
We walk your property, measure the fence line, note grade changes, and flag anything that affects layout, like slopes, existing landscaping, or shared property lines with neighbors.
2
Layout Marking and Utility Locate
We mark post locations and call in a utility locate before any digging starts, protecting buried gas, water, and electrical lines on your lot.
3
Post Setting
Steel-reinforced posts are set in concrete footings at the depth required for Utah's frost line, giving the fence the stability it needs to handle winter freeze and spring thaw without heaving.
4
Panel Installation and Final Walkthrough
Sherwood panels are hung, gates are hung and tested, and hardware is finished out. We walk the completed fence line with you before we consider the job done.
Why Choose Us
Why Utah Homeowners Choose CFC for Sherwood Fence Installation
CFC Fences & Decks has been building fences and decks across Utah since 1989. That means decades of experience reading local soil, frost depth, and wind exposure before a single post ever goes into the ground.
Decades of Fence Craftsmanship
Our crews specialize in fence and deck construction and install SimTek fence panels week in and week out, so every Sherwood fence installation is handled by a team that already knows the material inside and out.
Licensed, Bonded, and Backed by Warranty
We're a licensed, bonded, and insured fence contractor with an A+ rating on the BBB. Every Sherwood fence installation is backed by both the manufacturer's material warranty and our own workmanship standards.
Built for Utah's Climate
From the wind that rolls through Eagle Mountain and Saratoga Springs to the heavy snow loads in Park City and Summit County, we set every post and panel to hold up against the specific conditions of your property.
Explore Our Fencing Options
Other Fence Styles We Install
The Sherwood fence is one option in our full fencing lineup. If you're still comparing materials, here's a look at every fence style our crews install across Utah County, Summit County, and the greater Salt Lake City area.
Fence
Trex Composite Fencing
Composite fencing that pairs Trex's low-maintenance decking material with a fence system for a seamless yard.
Fence
Steel Fencing
Ornamental steel fencing for homeowners who want strength and a clean, formal profile.
Fence
SimTek Fencing
The full molded fence lineup, including Sherwood, Alleghany, and stone-textured panels.
Fence
Cedar Fencing
Real cedar privacy and dog-ear fence panels for homeowners who want natural wood grain and scent.
Fence
Rail Fencing
Split rail and lodgepole rail fencing for pastures, property lines, and open-yard curb appeal.
Fence
Vinyl Fencing
Vinyl privacy and picket fence panels that never need painting or staining.
Fence
Avimore Fencing
The Avimore Breeze fence system, a durable steel-and-composite hybrid built for privacy and airflow.
Fence
Quantum Fencing
A modern composite fence system designed for clean lines and long-term durability.
Common Questions
Sherwood Fence Installation: Common Questions
Here are the questions we hear most often from homeowners comparing the SimTek Sherwood fence against wood, vinyl, or other privacy fence options.
What makes the SimTek Sherwood fence different from a real wood privacy fence?
Both look similar from the curb, but the Sherwood panel is molded from a polymer and rubber blend instead of milled lumber. It carries the same wood-grain detail without the cracking, splintering, or annual staining that natural cedar needs to hold up in Utah's dry summers and cold winters.
How long does a typical Sherwood fence installation take?
Most residential installations are completed within one to three days, depending on the length of the fence line, the number of gates, and grade changes on the property. We give you a firm timeline during your free estimate once we've walked the site.
Do I need a permit for a privacy fence in Utah County or Salt Lake County?
Permit requirements vary by city and often depend on fence height and setback from the property line. We handle the permit research and paperwork as part of your project so you don't have to track down requirements yourself.
What color options are available for Sherwood panels?
Sherwood panels come in Dark Oak Gray, Red Cedar, and Walnut Brown finishes. We bring samples to your estimate appointment, or you can view full panels in person at either of our showrooms.
Licensed, bonded, and insured since 1989
Get Started
Ready for a Sherwood Fence That Never Needs Staining?
Get a free, no-pressure estimate on SimTek Sherwood fence installation for your Utah property. Our crews will measure your fence line, walk you through panel colors, and give you a straight answer on cost and timeline before you decide anything.
